Single Siphon replacement


*This method requires enough remaining pipe stub from the old siphon to clamp the Fernco coupler to. If no pipe stub is available, use the "Foam and Cement" method.

*The Flout can use the old trap or the old vent. When using the vent, a new vent should be provided. Use a tee instead of the elbow.  The trap is sealed off with mortar.

*Provide a shim such as a d-box cover or a built-on shim to keep the Flout body at or above the invert of the elbow or tee.

*With the Flout held straight up, the bottom of the Flout’s weir must be lower than the top of the vent or chamber inlet invert. 


>Back 
Rissy Plastics, LLC, 350 Cedar Lane, Torrington, CT 06790 USA, +1-860-482-1645
     Call or text  Jim directly  at +1-860-459-9995 or email TANXRUS@aol.com         ©2023 Rissy Plastics, LLC